EN ES
National · Pearson VUE

ICC G34 Journeyman Gas Pipe Fitter Exam (2018 IFGC)

Get ready for the ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) exam: key facts from the bulletin, the topics, the books you need, sample questions with answers and a study plan.

55 questions 120 minutes 70% to pass 5 topics 2:10 per question Open book 255 questions in pool Bulletin: June 2026
Full practice exam $9.95
  • 55 questions on a 120-minute clock, like the real exam
  • Every answer explained; code questions cite the book and section so you can find it in your own copy
  • A fresh draw from 255 questions each attempt
Try 10 free questions
Study Course $59.95/month
  • Unlimited full exams, topic quizzes and study briefs
  • Cancel anytime
See the study course
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
On this page

How to Pass the ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Exam

You don't have to guess how to prepare for the ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) exam. This guide lays it out: the key facts from the official bulletin, the topics on the test, the books you need, sample questions with answers, and a study plan you can follow. Pearson VUE gives the exam.

ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Exam Basics

Here's what the official bulletin says about the exam:

Questions 55 questions
Time limit 2 hours
Passing score 70% correct
Books in the exam room Open book
Exam fee $120

On exam day

  • Test questions are in four-option, multiple-choice format with one scored correct answer.
  • You may bring copyrighted, bound books to the test administration, including those specifically listed as approved references. However, training materials such as presentations, study guides, or practice questions are not permitted. All exam questions are based solely on the approved reference list, and only those references may be used as the basis for appealing exam questions.

References you may bring

  • 2018 International Fuel Gas Code

Scheduling, changes and retakes

  • Exams are scheduled through PearsonVUE at www.pearsonvue.com/ICC, where candidates can create an account, schedule an exam, locate a test center, purchase vouchers and request accommodations.
  • Results for examinations taken electronically are available immediately after the examination is completed.
  • You must wait 10 days before retaking a failed exam.
  • After passing, contact the jurisdiction in which you wish to be licensed for any other requirements, because ICC is not a licensing agency.

Source: National Contractor/Trades Examination Information Bulletin, PUBLISHED June 30, 2026; ICC Exam Catalog, checked October 6, 2026. Check the bulletin before test day: fees and rules can change.

What's on the ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Exam

The official content outline splits the exam into 5 topics:

Topic Questions Share of the exam
General Requirements 22 40%
Appliances and Equipment 13 24%
Fuel Supply System Sizing 5 9%
Combustion Air 7 13%
Chimneys and Vents 8 15%

Your ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Study Plan

Your books are your best friend on this exam. It's open book, so the references on the bulletin's list are what you'll use on test day. Get your own copies in the editions the bulletin names.

Get to know them early. Spend time with each book's table of contents and index until you can find any major subject quickly. On an open-book exam, finding answers fast is the skill that counts.

Make the books yours. Highlight the sections you keep coming back to. The exam facts above list the bulletin's rules on tabs and markings, so follow them exactly.

Put your energy where the points are. General Requirements and Appliances and Equipment make up 64% of the exam, so start there.

Practice with the clock running. Our timed practice exams help you build the pace the real exam needs: about 2 minutes 11 seconds per question. Every attempt is another rep.

Keep going until you pass practice exams consistently. One good score is a great start. A few passing scores in a row is how you know you're ready.

Books You'll Need for the ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Exam

The listed reference is the 2018 International Fuel Gas Code.

Where to get them:

Test Day Tips

Start with a quick pass through the whole exam. Answer every question you're sure about and bookmark the rest. Every exam lets you return to bookmarked questions, so nothing is lost by moving on. One catch: some exams lock the questions you've already seen once you take a break, so clear your bookmarks before any break.

Then come back to your bookmarks and work through them one at a time. Keep an eye on the clock: you have 2 hours for 55 questions, which is about 2 minutes 11 seconds per question. Before you finish, make sure every question has an answer. A blank can't earn a point.

Study Tips

This practice exam mirrors the real Pearson VUE exam — the same number of questions, drawn from the same topics. Practicing in that format now means no surprises when you sit for the real thing.

Our practice exam is specifically designed to mimic the testing conditions at all exam centers. While untimed PDF study guides might help with studying, they don’t prepare you for the challenge of managing your time during an actual test.

Be alert to hedging words like likely, may, can, sometimes, usually, generally, and rarely—question writers use them to account for exceptions. An answer choice is often wrong simply because it allows no exceptions. Similarly, avoid choices containing absolute terms like exactly and always.

Reading the material cover to cover usually isn't enough to pass. This is a multiple-choice exam, and multiple choice rewards practice — the more questions you work through under real conditions, the more the terminology and question style become second nature.

Try These ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) Practice Questions

Give these a try. They come from our practice question bank, each with its answer and reference.

Sample 1 — Combustion Air

Question: What is the minimum mesh size permitted for screens installed over combustion air openings?

  • A. 1/2 inch
  • B. 3/16 inch
  • C. 1/4 inch
  • D. 1/8 inch

Correct Answer: C

Per IFGC Section 304.10, screens used over combustion air openings shall have a mesh size not smaller than 1/4 inch (6.4 mm).

Reference: IFGC 2018 Section 304.10

Sample 2 — Fuel Supply System Sizing

Question: When using the hybrid pressure method for sizing gas piping, how is the pipe size determined from the line pressure regulator to each outlet?

  • A. Using the longest length of piping from the point of delivery to the most remote outlet in the entire system
  • B. Using a fixed length of 100 feet regardless of actual piping length
  • C. Using the length of piping from the point of delivery to the line pressure regulator only
  • D. Using the length of piping from the regulator to the most remote outlet served by the regulator

Correct Answer: D

Per IFGC Section 402.4.3, in the hybrid pressure method, the pipe size for each section of higher pressure gas piping shall be determined using the longest length from the point of delivery to the most remote line pressure regulator. The pipe size from the line pressure regulator to each outlet shall be determined using the length of piping from the regulator to the most remote outlet served by the regulator.

Reference: IFGC 2018 Section 402.4.3

Sample 3 — General Requirements

Question: When combining indoor spaces on the same story to meet combustion air volume requirements, each opening connecting the spaces must have a minimum free area of 1 square inch per 1,000 Btu/h of total input rating, but in no case less than what minimum area?

  • A. 50 square inches
  • B. 100 square inches
  • C. 150 square inches
  • D. 75 square inches

Correct Answer: B

Per IFGC Section 304.5.3.1, when combining spaces on the same story for combustion air, each opening shall have a minimum free area of 1 square inch per 1,000 Btu/h of the total input rating of all appliances in the space, but not less than 100 square inches.

Reference: IFGC 2018 Section 304.5.3.1

Sample 4 — Appliances and Equipment

Question: Which testing standard applies to unit heaters?

  • A. ANSI Z83.8/CSA 2.6
  • B. ANSI Z21.47/CSA 2.3
  • C. ANSI Z21.86/CSA 2.32
  • D. ANSI Z21.11.2

Correct Answer: A

Per IFGC Section 620.1, unit heaters shall be tested in accordance with ANSI Z83.8/CSA 2.6 and shall be installed in accordance with the manufacturer's instructions.

Reference: IFGC 2018 Section 620.1, Chapter 6

Why Practice Online?

Reading questions in a PDF is a start, but it doesn't prepare you for the clock. Our practice exams are timed and on a screen, so you build speed along with knowledge. Each attempt draws a new set of questions from our bank, and your results show your score by topic so you know where to focus next.

Ready to Start?

Take the free ICC G34 Journeyman Gas Pipe Fitter (2018 IFGC) practice exam and see where you stand today. Then focus on the topics that need the most work. For the official rules, read the exam bulletin, and see the licensing board's website.

Frequently Asked Questions

How much does the ICC G34 Journeyman Gas Pipe Fitter exam cost?
The exam fee is $120, paid when you register through Pearson VUE.
How many questions are on the ICC G34 exam and how long do I have?
The G34 exam has 55 multiple-choice questions and a 2-hour time limit.
What is the passing score for the ICC G34 Journeyman Gas Pipe Fitter exam?
You need to answer 70% of questions correctly to pass. Results are reported as pass or fail and are available immediately after you finish the electronic exam.
How do I register for the ICC G34 exam?
The exam is administered through Pearson VUE. Visit pearsonvue.com/ICC to create an account, schedule your exam, find a test center, and purchase a test voucher.
Is the ICC G34 Journeyman Gas Pipe Fitter exam open book?
Yes, the G34 is an open-book exam. The approved reference is the 2018 International Fuel Gas Code (IFGC).
Can I bring my own copy of the 2018 IFGC into the G34 exam?
Yes, candidates may bring copyrighted, bound books such as the approved reference into the exam room. Presentations, study guides, and practice questions are not permitted.
What topics are covered on the ICC G34 exam?
The exam covers five content areas based on the 2018 International Fuel Gas Code: General Requirements (40%), Appliances and Equipment (24%), Chimneys and Vents (14%), Combustion Air (12%), and Fuel Supply System Sizing (10%).
How long do I have to wait before retaking the ICC G34 if I fail?
You must wait at least 10 days before retaking a failed exam. ICC strongly recommends using that time to study the approved reference.
Will passing the ICC G34 exam give me a gas pipe fitter license?
No. ICC is not a licensing agency. Passing the exam demonstrates your competency, but whether the results satisfy licensing requirements is determined by your city, county, or state. Contact your local jurisdiction for their specific requirements.
What should I do if I want to challenge a question on the ICC G34 exam?
You must submit a Technical Challenge to ICC Credentialing staff. Be aware that if you retake the failed exam before a decision is made, you forfeit your challenge for that exam attempt. ICC staff will respond within 15 business days of receiving your challenge.

Reference books

1 book on the bulletin
As an Amazon Associate we earn from qualifying purchases.

Recommended Supplies

As an Amazon Associate we earn from qualifying purchases.
Took this practice exam? Tell other candidates how it went.
10 free questions30 min · no account
Start Free Exam