Arkansas · PSI

Arkansas Masonry - Residential Exam Practice Exam

30 questions 75 minutes 70% to pass 8 topics 2:30 per question Open book 135 questions in pool
Free Cheat Sheet Official Bulletin
Free

Free Practice Exam

$0

Test your knowledge with 10 questions from our pool of 20 free questions.

  • 10 questions per attempt
  • 30 minute time limit
  • Unlimited attempts
  • A new mix each time
  • Instant results
No account required.
Full Exam

Full Practice Exam

$9.95

Complete exam simulation matching the real PSI test format.

  • 30 questions (same as real exam)
  • 75 minute time limit
  • 8 topic areas covered
  • 135 questions in pool
  • Detailed explanations
Price per attempt. Never the same exam twice: each attempt draws a fresh set of questions.
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
Want a guided study plan? Study Course: topic briefs, 8 topic quizzes and this full exam, plus the Business and Law exam. $59.95/month.
See the study course

Arkansas Masonry - Residential Practice Exam Guide

Built from the official PSI exam bulletin. View the bulletin

What's on the exam

Questions per topic, out of 30
Unit Masonry10
Mortar and Grout7
Accessories4
Estimating and Plan Reading2
Tools2
Restoration and Cleaning2
OSHA Safety2
Stone1

This practice exam is built around the official content outline for the Arkansas Masonry - Residential exam: Estimating and Plan Reading, Unit Masonry, Mortar and Grout, Accessories, Stone, Tools, Restoration and Cleaning, OSHA Safety.

There are two ways to practice. The free practice exam gives you 10 questions per attempt, and you can take it as many times as you like. The full practice exam gives you 30 questions on a 75 minutes clock, with a new draw from our question bank each time.

8 topics

Estimating and Plan Reading 2 items

Unit Masonry 10 items

Mortar and Grout 7 items

Accessories 4 items

Our study plan for this topic: Wall ties: types and installation requirements (rectangular, Z, and corrugated ties); Adjustable ties and their applications in cavity and veneer wall construction; Joint reinforcement types (ladder, truss, and tab styles) and placement in mortar beds; Reinforcing bars and rods: sizes, placement, and corrosion protection; Anchor bolts and strap anchors: types and installation in masonry construction; Hardware cloth (mesh wall ties) for bonding intersecting masonry walls; Corrosion protection requirements for masonry metal accessories; Wall tie installation requirements per IRC (embedment depth, mortar coverage, spacing).

Stone 1 item

Tools 2 items

Restoration and Cleaning 2 items

OSHA Safety 2 items

3 questions

Sample 1 — Unit Masonry

Question: Unless otherwise required or indicated on the project drawings, what is the maximum permitted thickness of the bed joint of the starting masonry course placed over a foundation?

  • A. 1/2 inch
  • B. 3/8 inch
  • C. 3/4 inch
  • D. 5/8 inch

Correct Answer: C

Per IRC 2015 Section R606.3.1, head and bed joints are 3/8 inch thick, except the bed joint of the starting course placed over foundations shall be not less than 1/4 inch and not more than 3/4 inch.

Reference: IRC 2015 Section R606.3.1

Sample 2 — Mortar and Grout

Question: You are a masonry contractor and your crew has mixed a batch of mortar that has been sitting unused. What is the maximum time after initial mixing that mortar may be placed in its final position before it must be discarded?

  • A. 3 hours
  • B. 2 hours
  • C. 1 1/2 hours
  • D. 2 1/2 hours

Correct Answer: D

Mortar should be used and placed in final position within 2-1/2 hours after mixing to avoid hardening due to hydration. Mortar that has stiffened due to evaporation may be retempered, but mortar that has begun to harden from hydration must be discarded.

Reference: Modern Masonry (9th ed.), Chapter 10 — Mortar and Grout, Section 10.3.4

Sample 3 — Accessories

Question: Strap anchors used to connect intersecting bearing walls are usually 1-1/4" x 30" with right-angle bends at each end for embedding in mortar-filled cores. What is the length of those bends?

  • A. 3 inches
  • B. 4 inches
  • C. 6 inches
  • D. 2 inches

Correct Answer: A

Per Modern Masonry, Section 11.3 (Anchors), strap anchors are usually 1-1/4" x 30" with three-inch right-angle bends at each end for embedding in the mortar-filled cores of masonry block.

Reference: Modern Masonry (9th ed.), Section 11.3 (Anchors)

Your first score is just a starting point. After every attempt, the results page shows how you did on each outline topic, so you can see what to work on next. Compare your score with the real exam's passing score, 21 correct answers out of 30 scored questions, and keep at it until you pass consistently.

  • Start with the questions you know. Go through the whole exam once and bookmark anything you're unsure about. Our practice exams let you bookmark and come back.
  • Circle back to your bookmarks on the second pass.
  • Keep an eye on your pace. The real exam works out to about 2 minutes 30 seconds per question.
  • Turn every miss into a lesson. After each attempt, look up each missed question's reference in your book and read the section.

Questions 30 questions
Time limit 75 minutes
Passing score 21 correct answers out of 30 scored questions
Books in the exam room Open book

Source: Arkansas Contractors Licensing Board - Masonry Residential, 2/6/2020. Check the bulletin before test day: fees and rules can change.

Reference books

3 books on the bulletin
As an Amazon Associate we earn from qualifying purchases.
10 free questions30 min · no account