Arkansas · PSI

Arkansas Roofing/Roof Decks - Residential Exam Practice Exam

30 questions 75 minutes 70% to pass 5 topics 2:30 per question Open book 143 questions in pool
Free Cheat Sheet Official Bulletin
Free

Free Practice Exam

$0

Test your knowledge with 10 questions from our pool of 20 free questions.

  • 10 questions per attempt
  • 30 minute time limit
  • Unlimited attempts
  • A new mix each time
  • Instant results
No account required.
Full Exam

Full Practice Exam

$9.95

Complete exam simulation matching the real PSI test format.

  • 30 questions (same as real exam)
  • 75 minute time limit
  • 5 topic areas covered
  • 143 questions in pool
  • Detailed explanations
Price per attempt. Never the same exam twice: each attempt draws a fresh set of questions.
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
Want a guided study plan? Study Course: topic briefs, 5 topic quizzes and this full exam, plus the Business and Law exam. $59.95/month.
See the study course

Arkansas Roofing/Roof Decks - Residential Practice Exam Guide

Built from the official PSI exam bulletin. View the bulletin

What's on the exam

Questions per topic, out of 30
Steep Slope Roofing, including BUR, Waterproofing14
Estimating and Plan Reading5
Surface Preparation and Planning4
Roofing Components4
OSHA Safety3

This practice exam is laid out like the official content outline for the Arkansas Roofing/Roof Decks - Residential exam: Estimating and Plan Reading, Surface Preparation and Planning, Steep Slope Roofing, including BUR, Waterproofing, Roofing Components, OSHA Safety.

Two ways to practice: the free practice exam gives you 10 questions per attempt, as often as you want. The full practice exam gives you 30 questions on a 75 minutes clock, with a new draw from our question bank every time.

5 topics

Estimating and Plan Reading 5 items

Surface Preparation and Planning 4 items

Steep Slope Roofing, including BUR, Waterproofing 14 items

Roofing Components 4 items

Our study plan for this topic: Roof covering types and material standards (asphalt shingles, clay/concrete tile, metal shingles, slate, wood shakes/shingles); Underlayment types, application methods, and attachment requirements by roof covering and wind speed; Flashing components (drip edge, valley, step, apron, base, cap, counterflashing, crickets/saddles); Roof deck requirements and minimum slope by covering type; Ice barrier and water/ice-dam protection membrane installation; Roof accessories (roof vents, skylights, equipment curbs, expansion joints, prefabricated pipe flashings, snow guards, photovoltaic supports); Chimney flashing, counterflashing, and crickets/saddles; Fire classification of roof assemblies and wind resistance ratings.

OSHA Safety 3 items

3 questions

Sample 1 — Steep Slope Roofing, including BUR, Waterproofing

Question: Laminated asphalt shingles are also commonly referred to by which of the following names?

  • A. Interlocking shingles
  • B. Specialty shingles
  • C. Architectural shingles
  • D. Three-tab shingles

Correct Answer: C

Laminated shingles are sometimes called 'dimensional' or 'architectural' shingles. They have additional material laminated to strips to create random thicknesses, giving them a more dimensional appearance.

Reference: NRCA Roofing Manual: Steep-slope Roof Systems (2025), Section 4—Asphalt Shingles (Laminated Shingles)

Sample 2 — Estimating and Plan Reading

Question: What factors determine the size of ceiling joists in roof framing?

  • A. The distance they must span, the load they must carry, and the species and grade of wood
  • B. Only the species of wood and the spacing of the rafters
  • C. The thickness of the roof sheathing and the number of bearing walls
  • D. Only the total rise of the roof and the type of roofing material

Correct Answer: A

The size of ceiling joists is determined by the distance they must span and the load they must carry. The species and grade of wood must also be considered. Spacing and span limitations must comply with local building codes.

Reference: Carpentry and Building Construction, Section 17.3, Page 487

Sample 3 — Surface Preparation and Planning

Question: NRCA recommends panel edge clips be used when wood panel sheathing is installed over supporting members spaced at 24 inches on center and the sheathing is what nominal thickness or less?

  • A. ¾ inch
  • B. ⅝ inch
  • C. ⅜ inch
  • D. ½ inch

Correct Answer: D

NRCA recommends panel edge clips be used when wood panel sheathing of ½-inch nominal thickness (actual 15/32-inch) or less is installed over supporting members spaced at 24 inches on center.

Reference: NRCA Roofing Manual: Steep-slope Roof Systems (2025), Section 2.1—Wood Panels

Your first attempt is an inspection, not a final grade. The results page breaks your score down by outline topic, so you can see which areas need work. Compare it with the real exam's passing score, 21 correct answers out of 30 scored questions, and keep practicing until you pass consistently.

  • Answer what you know first and bookmark the rest. Our practice exams let you bookmark and come back.
  • Work your bookmarks on the second pass.
  • Keep your pace. The real exam works out to about 2 minutes 30 seconds per question.
  • After each attempt, look up each missed question's reference in your book and read the section.

Questions 30 questions
Time limit 75 minutes
Passing score 21 correct answers out of 30 scored questions
Books in the exam room Open book

Source: Arkansas Contractors Licensing Board – Roofing/Roof Decks – Residential, 10/17/2220. Check the bulletin before test day: fees and rules can change.

Reference books

5 books on the bulletin
As an Amazon Associate we earn from qualifying purchases.
10 free questions30 min · no account