Tennessee · Prov

Tennessee - NASCLA-Accredited Trade Examination For Electrical Contractor Practice Exam

100 questions 270 minutes 73% to pass 9 topics 2:42 per question Open book 497 questions in pool
Free Cheat Sheet Official Bulletin
Free

Free Practice Exam

$0

Test your knowledge with 10 questions from our pool of 20 free questions.

  • 10 questions per attempt
  • 30 minute time limit
  • Unlimited attempts
  • A new mix each time
  • Instant results
No account required.
Full Exam

Full Practice Exam

$9.95

Complete exam simulation matching the real Prov test format.

  • 100 questions (same as real exam)
  • 270 minute time limit
  • 9 topic areas covered
  • 497 questions in pool
  • Detailed explanations
Price per attempt. Never the same exam twice: each attempt draws a fresh set of questions.
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
Want a guided study plan? Study Course: topic briefs, 9 topic quizzes and this full exam. $59.95/month.
See the study course

Tennessee - NASCLA-Accredited Trade For Electrical Contractor Practice Exam Guide

Built from the official Prov exam bulletin. View the bulletin

What's on the exam

Questions per topic, out of 100
General Code Requirements17
Wiring and Protection17
Wiring Methods & Materials16
General Equipment Use13
Electrical Theory and Principles11
Safety9
Project Design & Management8
Special Occupancies, Special Equipment, and Special Conditions8
Communication Systems1

This practice exam is laid out like the official content outline for the Tennessee - NASCLA-Accredited Trade For Electrical Contractor exam: Project Design & Management, Safety, Electrical Theory and Principles, General Code Requirements, Wiring and Protection, Wiring Methods & Materials, General Equipment Use, Special Occupancies, Special Equipment, and Special Conditions, Communication Systems.

Two ways to practice: the free practice exam gives you 10 questions per attempt, as often as you want. The full practice exam gives you 100 questions on a 270 minutes clock, with a new draw from our question bank every time.

9 topics

Project Design & Management 8 items

Our study plan for this topic: Electrical load calculations and service sizing; Blueprint and schematic reading for electrical systems; Project scheduling and sequencing of electrical work; Material takeoffs and quantity estimation; Electrical system design compliance with NEC requirements; Job cost estimating and bidding; Coordination with other trades and project stakeholders; Permit and inspection processes for electrical projects.

Safety 9 items

Our study plan for this topic: Personal protective equipment (PPE) requirements for electrical work; Lockout/tagout procedures for electrical energy control; Electrical hazard identification and arc flash safety; OSHA regulations applicable to electrical contractors; Safe work practices for energized and de-energized electrical systems; Ladder and scaffold safety for electrical installations; Confined space entry procedures; Fire prevention and extinguisher use on job sites.

Electrical Theory and Principles 11 items

Our study plan for this topic: Ohm's Law and voltage, current, resistance relationships; Series and parallel circuit analysis; Power and energy calculations (watts, kilowatts, horsepower conversions); AC vs DC fundamentals and waveform characteristics; Capacitance and inductance in AC circuits; Power factor and reactive power concepts; Electromagnetism and transformer principles; Three-phase power calculations and configurations.

General Code Requirements 17 items

Our study plan for this topic: NEC Article 90 purpose, scope, enforcement, and arrangement of the Code; Article 100 definitions used across the Code (accessible, readily accessible, approved, listed, labeled, bonding, grounded, etc.); 110.2-110.3 approval, listing, and use of equipment per instructions; 110.4-110.7 voltages, conductor material, insulation integrity; 110.9-110.10 interrupting rating and short-circuit current ratings; 110.11-110.13 deteriorating agents, workmanship, mounting and cooling of equipment; 110.14 electrical connections, terminal temperature ratings, and torque; 110.15-110.16 high-leg marking and arc-flash hazard warning labels.

Wiring and Protection 17 items

Our study plan for this topic: Grounding and bonding requirements for electrical systems; Overcurrent protection sizing and device selection; Branch circuit ratings and conductor ampacity; Ground fault circuit interrupter (GFCI) protection requirements; Arc fault circuit interrupter (AFCI) protection requirements; Surge protection device requirements; Conductor insulation types and wiring methods; Service entrance and feeder protection requirements.

Wiring Methods & Materials 16 items

Our study plan for this topic: Cable and conduit types and their permitted uses; Conduit fill calculations and conductor allowances; Installation requirements for NM, MC, and AC cable; Raceway installation and support requirements; Wiring methods in specific occupancies and environments; Conductor sizing, insulation types, and temperature ratings; Protection requirements for wiring methods (physical damage, wet locations); Boxes, fittings, and enclosure requirements for wiring systems.

General Equipment Use 13 items

Our study plan for this topic: Safe use and handling of electrical tools and equipment; Equipment ratings and selection for electrical applications; Grounding and bonding of electrical equipment; Overcurrent protection requirements for equipment; Equipment installation and mounting requirements; Disconnecting means for electrical equipment; Equipment listing and labeling requirements; Working clearances and access around electrical equipment.

Special Occupancies, Special Equipment, and Special Conditions 8 items

Our study plan for this topic: Hazardous locations classification (Class I, II, III; Divisions 1 and 2); Wiring methods and equipment permitted in hazardous locations; Health care facilities electrical requirements (hospitals, nursing homes); Places of assembly occupancy wiring requirements; Agricultural buildings and structures electrical installations; Electric signs, outline lighting, and associated wiring; Swimming pools, fountains, and similar installations; Temporary installations and construction site wiring requirements.

Communication Systems 1 item

Our study plan for this topic: Installation requirements for communication wiring and cables; Article 800 telephone and telegraph systems; Coaxial cable installation and grounding; Network-powered broadband communications systems; Optical fiber cables and raceways; Bonding and grounding of communication systems; Separation from power conductors; Communication circuit protectors and surge protection.

3 questions

Sample 1 — General Code Requirements

Question: When a conductor with a 90°C insulation rating (such as THHN) is terminated on equipment rated for 75°C, which ampacity column must be used to determine the final ampacity of the conductor?

  • A. The average of the 75°C and 90°C column values
  • B. The 60°C column, since residential equipment defaults to that rating
  • C. The 90°C column, since that is the conductor's insulation rating
  • D. The 75°C column, matching the equipment termination temperature rating

Correct Answer: D

Per NEC 110.14(C), the ampacity of a conductor must be selected based on the lowest temperature rating of any connected termination, conductor, or device. When a 90°C conductor is connected to a 75°C terminal, its ampacity is limited to the 75°C column value. However, when applying correction or adjustment factors, the 90°C ampacity may be used as the starting point, provided the final derated value does not exceed the 75°C ampacity.

Reference: NEC 2023 Section 110.14(C)

Sample 2 — Wiring and Protection

Question: A branch-circuit disconnecting means is installed on a solidly grounded wye electrical system operating at more than 150 volts to ground but not exceeding 1000 volts phase-to-phase. Ground-fault protection of equipment must be provided for that disconnecting means when it is rated at least how many amperes?

  • A. 600 amperes
  • B. 400 amperes
  • C. 1000 amperes
  • D. 800 amperes

Correct Answer: C

NEC 2023, Section 210.13 requires each branch-circuit disconnecting means rated 1000 amperes or more, installed on solidly grounded wye systems of more than 150 volts to ground but not exceeding 1000 volts phase-to-phase, to be provided with ground-fault protection of equipment in accordance with 230.95. The 400, 600, and 800 ampere values are not the trigger point for this requirement.

Reference: NEC 2023 Section 210.13

Sample 3 — Wiring Methods & Materials

Question: You are a journeyman electrician installing wiring within a space above a hung ceiling that is used for environmental air handling (plenum). Which of the following wiring methods is permitted in this space?

  • A. PVC conduit
  • B. Electrical nonmetallic tubing (ENT)
  • C. Type AC cable
  • D. Nonmetallic-sheathed cable (Type NM)

Correct Answer: C

Per NEC 300.22(C)(1), wiring methods in other spaces used for environmental air (plenums) are limited to specific methods including Type AC cable. Nonmetallic-sheathed cable, PVC conduit, and ENT are not among the permitted wiring methods for plenums.

Reference: NEC 2023 Section 300.22(C)(1)

Your first attempt is an inspection, not a final grade. The results page breaks your score down by outline topic, so you can see which areas need work. Compare it with the real exam's passing score, 73% correct, and keep practicing until you pass consistently.

  • Answer what you know first and bookmark the rest (questions shown before a break are locked). Our practice exams let you bookmark and come back.
  • Work your bookmarks on the second pass.
  • Keep your pace. The real exam works out to about 2 minutes 27 seconds per question.
  • After each attempt, look up each missed question's reference in your book and read the section.

Questions 110 questions (100 scored, 10 unscored)
Time limit 270 minutes
Passing score 73% correct
Books in the exam room Open book
Exam fee $53
  • Results are reported immediately by email with a numerical score and pass/fail result, plus a diagnostic report for candidates who fail.
  • Failed exams may be retaken an unlimited number of times with no waiting period, at $53 per attempt.

Source: Tennessee Board for Licensing Contractors Candidate Information Bulletin, TNCONT_CIB 2026.08.18. Check the bulletin before test day: fees and rules can change.

10 free questions30 min · no account