EN ES
California · PSI

California C-10 Electrical Contractor Exam

A practical guide to the California C-10 Electrical Contractor exam: bulletin facts, what it covers, the books to study, sample questions with answers and how to prepare.

210 minutes 5 topics 1:49 per question Closed book 628 questions in pool Bulletin: June 2024
Full practice exam $9.95
  • 115 questions on a 210-minute clock
  • Every answer explained; code questions cite the book and section so you can find it in your own copy
  • A fresh draw from 628 questions each attempt
Try 10 free questions
Study Course $59.95/month
  • Unlimited full exams, topic quizzes and study briefs
  • Includes the Law and Business Exam (115 questions, 210-minute clock, 505-question pool)
  • Cancel anytime
See the study course
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
On this page

California C-10 Electrical Contractor Exam: A Practical Study Guide

The California C-10 Electrical Contractor exam tests the rules and trade knowledge behind the work. This guide lays out the job: the key facts from the official bulletin, what the exam covers, the study resources the bulletin lists, sample questions with answers, and how to get ready. PSI gives the exam.

The California C-10 Electrical Contractor Exam at a Glance

Here's the rundown from the official bulletin:

Questions Not published by the board
Time limit 210 minutes
Passing score Not published by the board
Books in the exam room Closed book (no books in the room)
Exam fee $51.43

On exam day

  • The exam is multiple choice with four choices per question, one BEST answer, and no penalty for guessing.
  • You must show one valid, non-expired government-issued photo ID from the listed types, and the name on it must match the name on your application.
  • You must arrive at the examination site at least 30 minutes before your scheduled appointment time.
  • This is a closed-book examination and no reference materials may be used during it.
  • A calculator is provided for the examination, and candidates may not bring their own calculator into the testing room.
  • Personal items such as phones, calculators, notes, textbooks, personal pens or pencils, watches and food or drink are prohibited in the testing room, while timing mechanisms are available in the room and on the computer console.

Study references listed in the bulletin (not allowed in the exam room)

  • California Building Code, California Code of Regulations, Title 24 (2025)
  • California Electrical Code, California Code of Regulations, Title 24 (2025)
  • California Energy Code, California Code of Regulations, Title 24 (2025)
  • California Fire Code, California Code of Regulations, Title 24 (2025)
  • American Electricians' Handbook
  • Photovoltaic Systems
  • State of California General Industry & Electrical Safety Orders (Cal/OSHA) and State of California Construction & Electrical Safety Orders (Cal/OSHA), California Code of Regulations, Title 8 (2025)
  • Ugly's Electrical References

Scheduling, changes and retakes

  • You schedule the examination yourself through PSI, online at https://test-takers.psiexams.com/cacon or by phone at (877) 392-6422.
  • After the Board approves you, your examination eligibility lasts 18 months from the date you were deemed eligible, and you must reapply once it expires.
  • You can cancel or reschedule without forfeiting your fee if PSI receives notice two days before the exam date, done through the PSI website or by speaking to a representative, and registration fees are never refundable or transferable.
  • Missing the appointment, arriving after the examination start time, failing to cancel two days ahead, or not presenting proper identification means you cannot test and you forfeit your examination fee.
  • You receive a printed score report at the check-in location immediately after your examination, and a failing report shows the overall score including the number of items answered correctly.
  • You must wait 21 calendar days after each attempt before testing again, may test as many times as needed within the 18-month eligibility period, and must pay a fee for each attempt.
  • Passing candidates receive additional instructions in the mail from CSLB, since the score report itself is not a license.

Source: Contractors State License Board Licensing Examination Information Guide – Electrical (C-10), 13E-10 (03/2026). Check the bulletin before test day: fees and rules can change.

What the California C-10 Electrical Contractor Exam Covers

The official content outline breaks the exam into 5 topics:

Topic Approximate share of the exam
Planning and Estimating 28%
Rough Wiring 27%
Finish Wiring and Trim 11%
Startup, Troubleshooting, and Maintenance 16%
Safety 18%

Planning and Estimating: The outline lists: Existing system evaluation; Plan and specification interpretation; Electrical calculations; Code requirements; Material selection; Energy production and storage project planning (photovoltaic, wind, generators, batteries, capacitors). Our study plan adds: Load calculation methods for branch circuits, feeders, and services (Article 220); Conductor sizing, ampacity, and derating factors.
Rough Wiring: The outline lists: System layout; Clearance and accessibility requirements; Raceway and panel installation; Wire and equipment installation; Grounding and bonding; Energy production and storage rough wiring (photovoltaic, wind, generators, batteries, capacitors). Our study plan adds: Conduit fill calculations and conductor count limits by raceway type; Conduit bending techniques (stub-ups, offsets, saddle bends, back-to-back bends).
Finish Wiring and Trim: The outline lists: Finish device placement and installation; Motor and equipment installation; Wire and equipment labeling; Trims and sealants; Energy production and storage finish wiring (photovoltaic, wind, generators, batteries, capacitors). Our study plan adds: Luminaire installation requirements and location restrictions; Switch types, wiring configurations, and installation requirements; Panelboard and switchboard finish installation and circuit identification.
Startup, Troubleshooting, and Maintenance: The outline lists: System energizing and testing; Common electrical problems; Location, repair, and replacement of inoperable electrical wires/components; Selection and use of electrical testing equipment; Energy production and storage system performance (photovoltaic, wind, generators, batteries, capacitors). Our study plan adds: Grounding and bonding system verification and testing; Overcurrent protective device selection, ratings, and coordination; Motor and generator inspection, lubrication, and maintenance procedures.
Safety: The outline lists: Lockout/tagout procedures; Personal protective equipment (PPE); Tools/equipment; Hazardous materials and job site environments. Our study plan adds: Injury and Illness Prevention Program (IIPP) requirements; Arc flash and shock hazard protection boundaries; Fall protection systems and requirements; Ground-fault circuit interrupter (GFCI) and assured equipment grounding programs.

How to Get Ready for the California C-10 Electrical Contractor Exam

This is a closed-book exam, so the knowledge has to be in your head, not in a book. Work through the topics in the outline.

Do the big jobs first. Planning and Estimating and Rough Wiring make up about 55% of the exam.

Put in the reps with timed practice exams.

When you miss a practice question, read the explanation and the reference behind it until the rule sticks. Keep at it until you pass practice exams consistently.

The Books for the California C-10 Electrical Contractor Exam

CSLB's study guide (03/2026) lists these codes and handbooks as study resources, with the 2025 California codes; the exam is closed book, so none may be brought into the testing room.

  • 2025 California Building Code (ICC)
  • 2025 California Electrical Code (BNI Publications)
  • 2025 California Energy Code (ICC)
  • 2025 California Fire Code (ICC)
  • American Electricians' Handbook (McGraw-Hill Professional)
  • Photovoltaic Systems (American Technical Publishers)
  • Ugly's Electrical References (Jones & Bartlett Learning)
  • Cal/OSHA General Industry & Electrical Safety Orders and Construction & Electrical Safety Orders, 2025 (California Code of Regulations, Title 8)

California code books can be viewed online at www.dgs.ca.gov/bsc.

Working the Exam on Test Day

Work the exam in two passes. On the first pass, answer everything you know and put down your best answer on the rest. Before the clock starts, the on-screen tutorial gives you sample questions to practice answering and reviewing your answers; use it to learn how to go back to a question. On the second pass, go back to the ones you were unsure of and take them one at a time.

Don't get hung up on one question. Before you finish, make sure nothing is left blank.

Study Tips

Reading the material cover to cover usually isn't enough to pass. This is a multiple-choice exam, and multiple choice rewards practice — the more questions you work through under real conditions, the more the terminology and question style become second nature.

Read the explanation for every question — right or wrong. Understanding the underlying rule lets you answer reworded questions you've never seen, instead of memorizing specific answers.

Several 25–30 minute sessions across the week beat one long cram. Spaced repetition moves facts into long-term memory so they stick through exam day.

Practicing against a ticking clock is the best way to beat exam-clock anxiety. Use these timed tests to build your pacing, so you learn to move steadily and never burn too long on a single question. By test day, the format feels routine.

Sample California C-10 Electrical Contractor Questions

These come from our practice question bank, each with its answer and the reference behind it.

Sample 1 — Startup, Troubleshooting, and Maintenance

Question: You are performing an arc flash risk assessment before energized diagnostic work on a 480-volt switchboard and must establish the arc flash boundary. The arc flash boundary is the approach limit from the prospective arc source at which the incident energy equals ______.

  • A. 1.2 cal/cm²
  • B. 12 cal/cm²
  • C. 8 cal/cm²
  • D. 40 cal/cm²

Correct Answer: A

The arc flash boundary is defined as the approach limit at which incident energy equals 1.2 cal/cm², the level testing has shown to represent the onset of a second-degree burn on exposed skin. Because injury at that level is survivable and nonpermanent, arc flash protection is not required at lesser levels. The 8, 12, and 40 cal/cm² figures are arc ratings associated with PPE selection, not the boundary definition.

Reference: American Electricians' Handbook, 17th ed., Div. 13, Sec. 78 (Determining the arc flash boundary)

Sample 2 — Finish Wiring and Trim

Question: As a C-10 contractor you are trimming out a stationary 2 hp, 230-volt, single-phase motor rated 300 volts or less with a full-load current of 12 amperes. You intend to use a general-use snap switch suitable only for use on ac as the motor disconnecting means. What is the minimum ampere rating the snap switch may have?

  • A. 30 amperes
  • B. 15 amperes
  • C. 20 amperes
  • D. 24 amperes

Correct Answer: B

Per CEC 430.109(C)(2), an ac-only general-use snap switch may serve as the disconnecting means for a stationary motor rated 2 hp or less and 300 volts or less only where the motor full-load current is not more than 80 percent of the ampere rating of the switch. 12 A ÷ 0.80 = 15 A. The 24-ampere answer comes from the different rule in 430.109(C)(1), which requires a general-use (non-snap) switch to be rated not less than twice the motor full-load current.

Reference: California Electrical Code 2025, Section 430.109(C)

Sample 3 — Planning and Estimating

Question: You are evaluating an existing 120/240-volt, single-phase, three-wire feeder in a multifamily building so the grounded conductor can be re-sized. After all Article 220 calculations, including the reductions permitted for ranges and dryers, the maximum unbalanced load between the neutral and an ungrounded conductor is 260 amperes, and none of the connected load is nonlinear. What neutral load may be used to size the grounded conductor?

  • A. 242 amperes
  • B. 182 amperes
  • C. 200 amperes
  • D. 260 amperes

Correct Answer: A

For three-wire dc or single-phase ac systems, a further demand factor of 70 percent may be applied to that portion of the maximum unbalanced load in excess of 200 A. The first 200 A is taken at 100 percent and the remaining 60 A at 70 percent (42 A), for 242 A. Option B wrongly applies 70 percent to the entire unbalanced load, and option D ignores the permitted reduction.

Reference: American Electricians' Handbook, 17th ed., Division 12, Sec. 5, Par. 5 (Neutral Feeder Load)

Sample 4 — Rough Wiring

Question: You are laying out an underground duct line for a campus distribution system. Because cable is normally furnished in lengths of 400 to 600 ft and all splices must be made in manholes, what is the recommended maximum spacing between manholes on a straight duct run?

  • A. 300 ft
  • B. 750 ft
  • C. 500 ft
  • D. 200 ft

Correct Answer: C

Recommended practice is to locate manholes not more than 500 ft apart. Cable is generally not made in lengths exceeding 400 to 600 ft, splices must be located in manholes, and excessive pull lengths impose too much mechanical strain on the conductors and sheath during the pulling-in process.

Reference: American Electricians' Handbook, 17th ed., Division 8, Sec. 111 (Manholes)

Why Practice Online Instead of With a PDF

A PDF is like reading about a job instead of doing it. Our practice exams are timed and on a screen, so you practice answering with the clock running. Each attempt draws a new set of questions from our bank, and your results break your score down by topic so you know where to put in more work.

Get Started

Take the free California C-10 Electrical Contractor practice exam to see where you stand, then put your time into the topics that need it. For the official rules, read the exam bulletin, and see the licensing board's website.

Frequently Asked Questions

How much does the California C-10 Electrical Contractor exam cost?
The exam fee is $51.43 per attempt, whether it is your first time or a retake. This fee is paid directly to PSI and is not refundable or transferable.
How many questions are on the C-10 Electrical exam, and what score do I need to pass?
CSLB does not publish the number of questions or the passing score for this exam. Your printed score report shows your overall score, and a failing report includes the number of items you answered correctly. Our practice exam uses 115 questions and a 72% target as its own practice setting, not as the official figures.
How do I schedule the California C-10 exam?
Once CSLB approves your application, you self-schedule and pay PSI directly. You can register online 24 hours a day at test-takers.psiexams.com/cacon, or call PSI at (877) 392-6422 Monday–Friday 4:30 a.m.–7:00 p.m. or Saturday–Sunday 8:00 a.m.–2:00 p.m. Pacific Time.
How long does my exam eligibility last, and how many times can I take the C-10 exam?
Your eligibility lasts 18 months from the date CSLB deems you eligible. During that period you may take the exam as many times as needed, but you must wait 21 calendar days after each attempt, and each attempt requires the $51.43 fee. If you do not pass before the void date, you must reapply to CSLB.
How long is the California C-10 exam appointment?
PSI schedules a 210-minute (3.5-hour) appointment for this exam. An on-screen tutorial of up to 15 minutes comes first and does not count against your exam time.
What ID do I need to bring to the C-10 exam?
You must bring one valid, non-expired government-issued photo ID: a U.S. driver's license or state ID card (any state), passport book or card, green card (permanent resident card), U.S. military ID, or U.S. Employment Authorization Card. The name on the ID must match your CSLB application.
Is the C-10 exam open book? Can I bring a calculator?
No. The exam is closed book. No books, notes, reading materials, personal calculators, phones, watches, or personal pens are allowed in the testing room. A calculator is provided at the test center for the questions that require math.
What topics are covered on the California C-10 Electrical Contractor exam?
The exam is divided into five sections: Planning and Estimating (28%), Rough Wiring (27%), Finish Wiring and Trim (11%), Startup, Troubleshooting, and Maintenance (16%), and Safety (18%). Energy production and storage (photovoltaic, wind, generators, batteries, and capacitors) appears in each of the first four sections. All percentages are approximate.
What is the format of the C-10 exam?
The exam is computer-based and multiple choice, with four answer choices per question and one best answer. One question appears on screen at a time, some questions require math, and there is no penalty for guessing, so answer every question.
What resources should I study for the California C-10 exam?
CSLB lists these study resources: the 2025 California Building, Electrical, Energy, and Fire Codes; the American Electricians' Handbook (McGraw-Hill Professional); Photovoltaic Systems (American Technical Publishers); Ugly's Electrical References (Jones & Bartlett Learning); and the Cal/OSHA General Industry & Electrical Safety Orders and Construction & Electrical Safety Orders. California code books can be viewed free online at www.dgs.ca.gov/bsc. These are for studying only, because the exam is closed book.
What happens when I finish the C-10 exam, and how do I get my results?
At the end of your exam you receive a printed score report at the check-in location. If you fail, the report shows your overall score including the number of items answered correctly. If you pass, the score report is not a license; CSLB will mail you further instructions.
How do I cancel or reschedule my C-10 exam without losing my fee?
You can cancel or reschedule at no charge if PSI receives your notice two days before your scheduled exam date. You must cancel through the PSI website or by speaking directly to a PSI customer service representative; voicemail and email are not accepted. A no-show, late arrival, late cancellation, or failure to present proper ID forfeits your fee.
Can I take the C-10 exam with a translator?
Yes. CSLB allows you to test with a translator you arrange yourself, such as a friend, family member or someone you hire. The translator must be approved by CSLB before the exam is scheduled and cannot be employed in construction, real estate, finance, architecture, engineering or law. Call CSLB at (916) 255-3498 for the translator form.
Do I also need to pass the California Law and Business exam?
California contractor license applicants also take the CSLB Law and Business exam unless CSLB waives it, so check your CSLB application. Buying our C-10 Electrical practice exam also unlocks our California Law and Business practice exam.

Reference books

9 books on the bulletin
As an Amazon Associate we earn from qualifying purchases.
Took this practice exam? Tell other candidates how it went.
10 free questions30 min · no account
Start Free Exam