EN ES
South Carolina · PSI

South Carolina Water and Sewer Plants

Get ready for the South Carolina Water and Sewer Plants exam: key facts from the bulletin, the topics, the books you need, sample questions with answers and a study plan.

50 questions 180 minutes 70% to pass 6 topics 3:36 per question Open book 290 questions in pool Bulletin: September 2026
Full practice exam $9.95
  • 50 questions on a 180-minute clock, like the real exam
  • Every answer explained; code questions cite the book and section so you can find it in your own copy
  • A fresh draw from 290 questions each attempt
Try 10 free questions
Study Course $59.95/month
  • Unlimited full exams, topic quizzes and study briefs
  • Cancel anytime
See the study course
Not sure which exam you need? Text us: (813) 582-5360
Texts preferred · 9am–9pm Central
On this page

How to Pass the South Carolina Water and Sewer Plants Exam

You don't have to guess how to prepare for the South Carolina Water and Sewer Plants exam. This guide lays it out: the key facts from the official bulletin, the topics on the test, the books you need, sample questions with answers, and a study plan you can follow. PSI gives the exam.

South Carolina Water and Sewer Plants Exam Basics

Here's what the official bulletin says about the exam:

Questions 50 scored questions plus up to 10 unscored experimental questions that count against your time
Time limit 3 hours
Passing score 35 correct answers out of 50 scored questions
Books in the exam room Open book
Exam fee $78

On exam day

  • One valid, unexpired signature- and photo-bearing government ID matching the registered legal name is required at the test site.
  • Candidates should arrive at the examination site at least 30 minutes before their appointment.
  • Reference books may be highlighted, underlined and indexed, but must be otherwise unmarked (not written in) and may not contain additional papers, loose or attached. References may be tabbed with permanent tabs only. Proctors inspect all books before and after the examination.
  • Books may be highlighted, underlined and indexed but not written in, and only permanent tabs that would tear the page if removed are allowed.
  • Only silent, battery-operated, non-programmable calculators without paper tape printing or an alphabetic keyboard are allowed.
  • Only approved items may be taken into the examination room and all personal belongings, including electronic devices, writing devices, reading material, food and drinks, must be stored in the secure storage provided.

References you may bring

  • Code of Federal Regulations - 29 CFR Part 1926 (OSHA), with latest available amendments
  • Code of Federal Regulations - 29 CFR Part 1926 Selections by PSI, with latest available amendments
  • Design and Control of Concrete Mixtures (17th Edition)
  • Placing Reinforcing Bars, Recommended Practices (10th Edition, 2019 or later printing)
  • Excavation and Grading Handbook (2006)
  • DIPRA Installation Guide for Ductile Iron Pipe (2007 (revised 2021))
  • South Carolina 811 Excavator Manual (latest edition)

Scheduling, changes and retakes

  • Candidates schedule online at https://test-takers.psiexams.com/sccon or by calling PSI at (855) 340-3701.
  • Minimum qualification must be met before registering, and the Registration Confirmation Notice issued after PSI approval is valid for one year or until an examination classification has been failed twice within the referenced time frame.
  • Candidates may cancel and reschedule without forfeiting the fee if notice is received 2 days before the examination date, and voice mail or email is not acceptable notice.
  • Candidates who fail to cancel on time, do not appear, arrive after the examination start time, or lack proper ID have their registration invalidated and forfeit the examination fee.
  • Results are given immediately on screen, with a performance summary for passers and a printed diagnostic report for those who fail.
  • Each classification examination (except Burglar and Fire Alarm) may be taken only twice in a 12-month period and thereafter only once in six months, and a passed exam may not be retaken.
  • After passing the required examinations, the candidate submits the commercial license application with the documented experience affidavit.

Source: Commercial Contractor Candidate Information Bulletin, Updated 9/15/2026. Check the bulletin before test day: fees and rules can change.

What's on the South Carolina Water and Sewer Plants Exam

The official content outline splits the exam into 6 topics:

Topic Questions Share of the exam
Safety - Code of Federal Regulations 4 8%
General Plant Construction 20 40%
Concrete 6 12%
Concrete - Reinforcing Steel 6 12%
Excavating and Grading 8 16%
Miscellaneous Engineering - Design Elevations 6 12%

Your South Carolina Water and Sewer Plants Study Plan

Your books are your best friend on this exam. It's open book, so the references on the bulletin's list are what you'll use on test day. Get your own copies in the editions the bulletin names.

Get to know them early. Spend time with each book's table of contents and index until you can find any major subject quickly. On an open-book exam, finding answers fast is the skill that counts.

Make the books yours. Highlight the sections you keep coming back to. The exam facts above list the bulletin's rules on tabs and markings, so follow them exactly.

Put your energy where the points are. General Plant Construction and Excavating and Grading make up 56% of the exam, so start there.

Practice with the clock running. Our timed practice exams help you build the pace the real exam needs: about 3 minutes per question. Every attempt is another rep.

Keep going until you pass practice exams consistently. One good score is a great start. A few passing scores in a row is how you know you're ready.

Books You'll Need for the South Carolina Water and Sewer Plants Exam

The bulletin lists the Water & Sewer Plants reference books, including the 29 CFR Part 1926 (OSHA) regulations (or PSI's Selections), Design and Control of Concrete Mixtures 17th Edition, Placing Reinforcing Bars 10th Edition, Excavation and Grading Handbook 2006, the DIPRA Installation Guide for Ductile Iron Pipe, 2007 (revised 2021), and the South Carolina 811 Excavator Manual, latest edition.

Where to get them:

Test Day Tips

Start with a quick pass through the whole exam. Answer every question you're sure about and bookmark the rest. Every exam lets you return to bookmarked questions, so nothing is lost by moving on. One catch: some exams lock the questions you've already seen once you take a break, so clear your bookmarks before any break.

Then come back to your bookmarks and work through them one at a time. Keep an eye on the clock: you have 3 hours for 50 scored questions plus up to 10 unscored experimental questions that count against your time, which is about 3 minutes per question. Before you finish, make sure every question has an answer. A blank can't earn a point.

Study Tips

Don't let the clock rattle you. It's easy to feel overwhelmed when facing a page full of questions, a racing mind, and a ticking clock. Stay calm and stick to your planned pace. If you've been monitoring your progress consistently, you'll have enough time to finish. Even if the final minutes feel rushed, as long as you have only as many questions remaining as you should at that point, you're exactly where you need to be.

Skim the answer choices before you commit. You're hunting for the key term or vocabulary word that signals the right concept. The more you've practiced, the faster the right wording jumps out at you.

You're given plenty of time, so use as much of it as you need. Don't get rattled when other people finish early — finishing first isn't a prize. Work at your own steady pace and review your answers before you submit.

Read the explanation for every question — right or wrong. Understanding the underlying rule lets you answer reworded questions you've never seen, instead of memorizing specific answers.

Several 25–30 minute sessions across the week beat one long cram. Spaced repetition moves facts into long-term memory so they stick through exam day.

Try These South Carolina Water and Sewer Plants Practice Questions

Give these a try. They come from our practice question bank, each with its answer and reference.

Sample 1 — Concrete - Reinforcing Steel

Question: High-early-strength cement causes concrete to attain its rated strength in approximately what fraction of the time required with ordinary cement?

  • A. Three-quarters to four-fifths
  • B. One-quarter to one-fifth
  • C. One-half to one-third
  • D. One-sixth to one-eighth

Correct Answer: C

High-early-strength cement will cause concrete to attain about the same strength in about one-half or one-third of the time required with ordinary cement.

Reference: Placing Reinforcing Bars (10th ed.), Chapter 3 — Concrete and Reinforced Concrete - Definitions

Sample 2 — Miscellaneous Engineering - Design Elevations

Question: An obstruction blocks the line of sight between the surveyor's hub and the point your grade setter needs to shoot, so he is setting boots before grading begins. At this station the surveyor's information stake reads C-2.45, and because of the obstruction a 5-foot boot is required instead of the usual 4-foot boot. Measuring from the surveyor's hub, at what distance up the lath should the horizontal boot line be marked?

  • A. 1.55 feet
  • B. 2.45 feet
  • C. 2.55 feet
  • D. 7.45 feet

Correct Answer: C

Per the Excavation & Grading Handbook, 'Setting Boots' (Page 75), a boot is marked so the line is an even number of feet above the finished grade the surveyor staked. On a cut, the cut is subtracted from the boot height: 5.00 - 2.45 = 2.55 feet measured up from the hub. (A 4-foot boot on the same stake would be 1.55 feet — option A.) A fill, not a cut, would be ADDED to the boot height (2.45 + 5.00 = 7.45 — option D). Note the handbook also states a 6-foot boot is never used because it is too high to shoot to.

Reference: Excavation and Grading Handbook, Page 75 — Setting Boots

Sample 3 — Safety - Code of Federal Regulations

Question: A survey crew is using laser equipment to set elevations for a piping installation. Employees working in an area where potential exposure to direct or reflected laser light exceeds what level must be provided with antilaser eye protection devices?

  • A. 50 milliwatts
  • B. 5 milliwatts
  • C. 10 milliwatts
  • D. 0.5 milliwatt

Correct Answer: B

Per 29 CFR 1926.54(c), employees working in areas where a potential exposure to direct or reflected laser light greater than 0.005 watts (5 milliwatts) exists shall be provided with antilaser eye protection devices.

Reference: OSHA 29 CFR 1926, §1926.54(c)

Sample 4 — General Plant Construction

Question: Your crew has completed placing calcium hypochlorite granules and 5-gram tablets in a new main and has filled it with potable water at a velocity not exceeding 1 fps. The water temperature measured in the filled main is 38°F. What is the minimum time the water must remain in the pipe before flushing?

  • A. 36 hours
  • B. 12 hours
  • C. 48 hours
  • D. 24 hours

Correct Answer: C

Section 7.3 requires the water be left in the pipe a minimum of 24 hours before flushing, but 48 hours if the water temperature is less than 41°F. At 38°F the 48-hour retention applies.

Reference: DIPRA Installation Guide for Ductile Iron Pipe, Page 87 (Section 7.3 Disinfecting)

Why Practice Online?

Reading questions in a PDF is a start, but it doesn't prepare you for the clock. Our practice exams are timed and on a screen, so you build speed along with knowledge. Each attempt draws a new set of questions from our bank, and your results show your score by topic so you know where to focus next.

Ready to Start?

Take the free South Carolina Water and Sewer Plants practice exam and see where you stand today. Then focus on the topics that need the most work. For the official rules, read the exam bulletin, and see the licensing board's website.

Frequently Asked Questions

How much does the South Carolina Water and Sewer Plants exam cost?
The exam fee for the Water and Sewer Plants examination is $78.
How many questions are on the SC Water and Sewer Plants exam and how long do I have?
The exam has 50 questions and you are allowed 3 hours to complete it.
What is the passing score for the South Carolina Water and Sewer Plants exam?
You need to answer 35 out of 50 questions correctly in order to pass.
What other exam do I need to take besides the Water and Sewer Plants technical exam?
All Water and Sewer Plants Commercial Contractor candidates are required to pass the Business Management and Law for Contractors Examination in addition to the Water and Sewer Plants Examination.
How many times can I take the Water and Sewer Plants exam if I fail?
The exam may only be taken 2 times in a 12-month period, and thereafter only once every six months. If you pass, you are not allowed to take the same exam again.
How do I register for the South Carolina Water and Sewer Plants exam?
You can register online at PSI's website (available 24 hours a day) or by telephone at (855) 340-3701, Monday through Friday 7:30 am to 10:00 pm and Saturday and Sunday 9:00 am to 5:30 pm Eastern Time. Telephone registration requires a valid credit card (VISA, MasterCard, American Express, or Discover).
Is the Water and Sewer Plants exam open book?
Yes, the Commercial Contractors examinations are open book. You may bring the reference books listed in the bulletin, which may be highlighted, underlined, and indexed, but must otherwise be unmarked and may not contain additional loose or attached papers.
What reference books are allowed for the SC Water and Sewer Plants exam?
Allowed references include: Code of Federal Regulations 29 CFR Part 1926 (OSHA); Design and Control of Concrete Mixtures, 17th Edition (Kosmatka and Panarese); Placing Reinforcing Bars, Recommended Practices, 10th Edition (2019 or later); Excavation and Grading Handbook, 2006 (Craftsman Book Company); DIPRA Installation Guide for Ductile Iron Pipe, 2007 (revised 2021); and the South Carolina 811 Excavator Manual, latest edition.
What identification do I need to bring to the Water and Sewer Plants exam?
You must bring one valid, non-expired, photo-bearing, signature-bearing government-issued ID, such as a state driver's license, state ID card, U.S. passport, U.S. military ID, U.S. Alien Registration Card, or Canadian government-issued ID. The name on your ID must match the name under which you registered.
Can I bring a calculator to the Water and Sewer Plants exam?
Yes, but only non-programmable calculators that are silent, battery-operated, do not have paper tape printing capabilities, and do not have an alphabetic keyboard are allowed in the examination site.
Took this practice exam? Tell other candidates how it went.
10 free questions30 min · no account
Start Free Exam